Alat Pemberi Pakan Udang dan Pemantau Kekeruhan Air yang Dilengkapi dengan Filter Air dan Sistem Penggantian Air Menggunakan WeMos D1 R1 Berbasis Internet of Things


Authors

  • Alwi Ristanta Universitas Harapan Medan, Medan, Indonesia
  • Abdul Jabbar Lubis Universitas Harapan Medan, Medan, Indonesia
  • Risko Liza Universitas Harapan Medan, Medan, Indonesia
  • Dodi Siregar Universitas Harapan Medan, Medan, Indonesia

DOI:

https://doi.org/10.47065/jimat.v1i3.125

Keywords:

Shrimp Farming; WeMos D1 R1; Blynk Application; Turbidity Water; Servo Motor

Abstract

In a shrimp farming area, several things appear. Where shrimp farming jobs still use traditional methods or work manually so they need a lot of time. Shrimp farming is an entrepreneur with long production results, so hereby collect some of the main problems experienced by shrimp farmers. The author conducts research to support businesses to operate effectively, efficiently and practically. It is known that shrimp farmers have little difficulty in maintaining feed. Therefore, the authors designed a feeder and water turbidity monitor that can work automatically based on the feeding schedule and the level of water turbidity. This shrimp feeder and water turbidity monitor uses the WeMos D1 R1 microcontroller which is the main control center, uses the Blynk application to control the tool, and uses servo motors, sensors, filters and other components. By using these components and some software that supports the tool, shrimp feeders and water turbidity monitors can work automatically according to a predetermined schedule, and are able to send notifications to Blynk when the tool finishes the work process

Downloads

Download data is not yet available.

References

Novianda, L. Fitria, A. Ihsan, and Munawir, “SISTEM CERDAS PEMBERIAN PAKAN OTOMATIS DALAM PENINGKATAN PRODUKTIVITAS PANEN UDANG,” J. Ilm. JURUTERA, vol. 6, no. 2, pp. 19–22, 2019.

R. Rivani, A. Hiendro, and Syaifurrahman, “Studi perancangan dan analisis sistem pengisian cerdas ( smart charge ) baterai,” J. Tek. Elektro Univ. Tanjungpura, vol. 2, no. 1, pp. 1–10, 2019.

M. Nega, E. Susanti, and A. Hamzah, “INTERNET OF THINGS (IoT) KONTROL LAMPU RUMAH MENGGUNAKAN NODEMCU DAN ESP-12E BERBASIS TELEGRAM CHATBOT,” J. Scr., vol. 7, no. 1, pp. 88–99, 2019.

Q. Fitriyah, T. V. Putri, A. Wirangga, and M. P. Eko, “Pemanfaatan Aplikasi Blynk Sebagai Alat Bantu Monitoring Energi Listrik Pada Kulkas 1 Pintu,” Natl. Conf. Ind. Eng. Technol., vol. 1, no. 1, pp. C84–C92, 2020.

Z. Oby, Basic Arduino #1. Yogyakarta: Indobot Robotic Center, 2017.

C. Anam, E-BOOK ESP8266. www.anakkendali.com, 2019.

Faizal Fatturahman and I. Irawan, “Monitoring Filter Pada Tangki Air Menggunakan Sensor Turbidity Berbasis Arduino Mega 2560 Via Sms Gateway,” J. Komputasi, vol. 7, no. 2, pp. 19–29, 2019, doi: 10.23960/komputasi.v7i2.2422.

N. Lestari, “Rancang Bangun Pintu Otomatis Menggunakan Arduino Uno Dan Pir (Passive Infra Red) Sensor Di Smp Negeri Simpang Semambang,” JUSIKOM, vol. 2, no. 2, pp. 62–68, 2017.


Bila bermanfaat silahkan share artikel ini

Berikan Komentar Anda terhadap artikel Alat Pemberi Pakan Udang dan Pemantau Kekeruhan Air yang Dilengkapi dengan Filter Air dan Sistem Penggantian Air Menggunakan WeMos D1 R1 Berbasis Internet of Things

Dimensions Badge

ARTICLE HISTORY

Published: 2021-07-31

Abstract View: 498 times
PDF Download: 454 times

Issue

Section

Articles